CenturionPro GC Mini Bucker Hemp Debudder & Bucking Machine

If you think Buckers can’t get any smaller, CenturionPro says otherwise.

The CenturionPro GC Mini Bucker is a gentle bucker made for the small-scale grower.

Based on the CenturionPro GC1 Bucker, the GC Mini features the same quality cut you get from its bigger brother. With an hourly capacity of up to 20 pounds of wet plant material and four pounds of dry plant material, the GC Mini improves the processing from small-scale harvests.

Powering the GC Mini is a 0.25 horsepower motor that lets the machine cut off buds from the stem with utmost care. This Bucker features three (3) feed holes of 3/16, 1/4, and 3/8 inch in diameter. The GC Mini is just as robust as its bigger sibling with its stainless steel and aluminum build, making it a durable machine.

The GC Mini comes with a two-year warranty.

CenturionPro GC Mini Features

Same Gentle Cut

The GC Mini does the same quality and careful cut that you get from the GC1

High Capacity

De-stem up to 20 pounds of wet plant material or 4 pounds of dry buds in just an hour with the help of the 0.25 horsepower motor.

Durable and Reliable

The GC Mini was designed to last you with continuous use with its aluminum and stainless steel build and the optional Parts Kit to keep your machine going

Two-Year Warranty

The GC Mini comes with a two-year warranty.

Highlights in the CenturionPro GC Mini

De-stems 20 pounds wet and 4 pounds dry
0.25 Horsepower Motor
Three feed holes (3/16, 1/4 and 3/8 inches)
Stainless Steel and Aluminum Parts
Cuts, not pulls, the buds off the stems
Comes with a two-year warranty

CenturionPro GC Mini Specifications

Input Voltage NA	120V, 60Hz Single Phase EU, AUS: 240V, 50Hz Single Phase
Current Draw NA	< 6A Operating EU, AUS: < 3A Operating
Motor	0.25HP
Motor RPM	1750 RPM
Weight	46lbs / 21kg
Length	15in / 38cm
Width	17in / 43cm
Height	19in / 48cm
Circuit Breaker Required NA	15A/120V EU, AUS: 15A/220V
Feed Types	Dry/Wet
Feed Entry Sizes	3-hole (3/16”, 1/4”, 3/8”)
Feed Throughput	+4lbs/hr (Dry) \| +20lbs/hr (Wet)
Blade Length	9-5/8”
GMP Compliant	Yes
UL Compliant	Yes
CE Compliant	Yes
RoHS Compliant	Yes
Primary Material	304 Stainless Steel / Aluminum
Warranty	2 Years

CenturionPro GC Mini Manual

CenturionPro GC Mini

CenturionPro GC Mini Warranty

CenturionPro Solutions (the manufacturer) will repair or replace, without charge, any parts have proven defective in material or workmanship for a period of 2 Years.

The warranty period will begin on the date the machine(s) is purchased by the initial purchaser. Product or component warranty defects can be remedied at any authorized service dealer, or directly at the manufacturer.

Any service work performed, and deemed valid due to a defective part, will be free of charge. CenturionPro Solutions reserves the right to use any manufacturer-approved replacement part for the warranty repair.

The machine or defective part then must be returned to the manufacturer for analysis or replacement at the cost of the owner. Parts deemed to be covered under the warranty will be provided for free excluding shipping costs.

Do not return the machine to the place of purchase for repair or warranty claims, unless you have been authorized by CenturionPro Solutions to do so. The place of purchase can only sell replacement parts and will not repair any warranty issues unless it is noted as an authorized repair dealer and has been authorized to work on your machine.

All sales final.

Customer Reviews

Based on 1 review

100%

(1)

(0)

CenturionPro GC Mini Bucker Hemp Debudder & Bucking Machine